Lifestyle
How to Fix a Leaky Faucet
Here’s a simple solution to solving a leaky faucet. If you have the right tools and the willingness to attempt in fixing your leaky faucet, here are simple solutions to it:
Needs: Replacement washers and O rings, flathead screwdriver, adjustable wrench
Read through these steps before starting your fix, just to get the grasp of how to do it. This may not be the simple fix you need, but it’s an easy way to give it a first pass.
Many (especially those who are new to DIY repair) might forget this step. First pull the stopper to the sink, and then look at under your sink, where you’ll find two handles attached to a valve with pipes or hoses that lead to the faucets. Turn them off.
Note that it might be covered with a plastic or rubber cover. Use a flathead screwdriver to pop it off. Under each handle, look for the screw or ring that mounts the handle in place and remove each.
You’ll likely find a metal nut that holds the stem of the faucet. Use the wrench to remove the nut, and then the stem. You should find the O ring and washer next. Remove them and have replacements that are the exact same size (you can bring the old ones to the hardware store). Replace the O ring and washer.
After replacing the O ring and washer, replace the stem and the metal nut that holds it; the securing screws or rings for the handles (along with the plastic or rubber cover); securing each screw or ring for each handle; and finally, the handles.
Turn the water back on, gently turn the faucets on and then off, and sit back and wait for the drips. If you don’t have any, your project was a success!
If, however, you think your troubles might be more serve, it’s better to contact though a reputable plumber for assistance instead.
Source: www.sheknows.com